Plate & Girder Scrap: ISRI Spec – 232

Specification:

Plate & Girder Scrap: ISRI Spec – 232
Plate and Structure consisting of cut structural and plate arisings predominantly 6mm thick in sizes not exceeding 1.50m X 0.60m X 0.60m. Prepared in a manner to ensure compact charging.
ISRI Spec – 232

Specification:

Product Description HMS 1&2 200-206 (Mix of 80% HMS1 and 20% HMS2)
Product Specification/Models The scrap consists out of a mix of mill scrap (stampings, cuttings, bars, etc.), Industrial scrap (nuts, bolts, misc. pieces, etc), auto and truck frames. Ship scrap (fittings, plate pieces, and parts), construction scrap (plate, bars, angle pieces, rods, steel pipe, etc.) and miscellaneous commercial scrap (casings & frames.). Non-Metal impurities total of 1% (one percent), or less. HMS 1 - ISRI Code 200: Heavy melting steel. Wrought iron and/or steel scrap ¼ inch or steel scrap ¼ inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging. HMS 2 - ISRI Code 203: Heavy melting steel.

Specification:

Steel fragmentised into pieces not exceeding 200mm in any direction. Free of dirt, free of non-ferrous metals and foreign material. Also free of tin cans. Density approximately 0.80 tonne per cu m minimum.
ISR Spec – 210/211

Specification:

Heavy Carbon Steel Turnings, majority crushed or naturally short. Free of non-ferrous metals, dust.
ISRI Spec – 219/221